G/GH series sand and gravel pump

G/GH series gravel pump parameters:

Caliber: 100 ~ 400 (mm)

Flow rate: 36 ~ 5040 (m3/h)

Head: 3 ~ 80 (m)

Model meaning Description:

E.g. 6/4D-G(GH)

6: Inlet diameter of 6 inches (150mm)

4: Outlet diameter of 4 inches (100mm)

D: Bracket form

G: Gravel pump

GH: High lift sand and gravel pump

Product features:

1. G/GH series pumps are horizontal, single pump shell structure of the centrifugal pump.

2. the use of special clamp clamp pump body and pump cover, pump outlet direction can be in 360 degrees at any position, easy to install and use.

3. the bearing assembly of the pump adopts the cylinder structure, which is easy to adjust the gap between the impeller and the pump body, and can be removed as a whole during maintenance. Bearings are lubricated with grease.

4. the pump shaft seal form has packing seal, impeller seal, mechanical seal.

5. pump flow channel wide, good cavitation performance, high efficiency, abrasion resistance.

6. the transmission mode mainly includes V-shaped triangle belt transmission, elastic coupling transmission, gear reduction box transmission, hydraulic coupling transmission, variable frequency drive device, thyristor speed regulation.

7. the flow parts are made of high hardness anti-wear alloy cast iron.

8. adopt a variety of speeds and a variety of variants, so that the pump operates under working conditions. Long service life, high operating efficiency, can meet a variety of bad transportation.

9. ZSH pump for high head pump.

Scope of application:

It is mainly used for continuous transportation of large particles and strong abrasive materials. It is suitable for dredging, sucking gravel, dredging river, mining and metal smelting slag conveying.